Use Mr.Mark Softer to apply dry transfer decals.
This is a softening agent for slide marks. It has the effect of closely adhering slide marks to curved surfaces.
Instructions
Apply a quick drop toward surface of the decal. Use the brush to attach the cap.
Apply gentle pressure to the decal with a soft cloth. Remove any excessive liquid and sticking the decal down fast.
The decal will stick perfectly, regardless uneven or curved surfaces.
If the air gets in between decal and the model surface, after drying delicately prick the decal with a needle and insert Mr. MARK SOFTER through the resulting hole. The air will escape and the decal will stick down firmly.
Mr Mark Softer is the second part of a 2 part system, the same as most decal solutions. Part 1 is Mr Mark Setter. The instructions on the Mr Mark Setter bottle (blue) read:
1. For decals, Mr Mark Setter both softens and strengthens adhesivness. ( I take this to mean softens the decal and strengthens the adhesive)
2. Mr Mark Setter is applied to position the decal over the area.
3. Apply the decal.
4. You can apply Mr Mark Softer on the decal when necessary. ( I take this to mean apply it if the decal needs more help to snuggle down )
